I can't active Android Subsystem

Marcos_Aurelio · October 24, 2022, 8:21am

Hi!
I can’t install Android Subsystem on my HP DM1 laptop, AMD Dual Core E-350
It just loads and doesn’t install.

Here is the diagnosis made in FydeOS

	SYSTEM INFORMATION	]
Manufacturer: Hewlett-Packard
Product Name: HP Pavilion dm1 Notebook PC
Version: 0589110000252B00000310100
Wake-up Type: Power Switch
SKU Number: LZ015LA#AC4
Family: 103C_5335KV G=N L=CON B=HP S=PAV

[	BIOS INFORMATION	]
BIOS is upgradeable
BIOS shadowing is allowed
BIOS ROM is socketed
BIOS Revision: 15.18

[	MEMORY INFORMATION	]
Size: No Module Installed
Bank Locator: BANK0
Size: 2048 MB
Bank Locator: BANK0

[	WIRELESS INFORMATION	]
System wireless pci devices list:
02:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4313 802.11bgn Wireless Network Adapter (rev 01)
	Subsystem: Hewlett-Packard Company Device 1483
	Kernel driver in use: bcma-pci-bridge
	Kernel modules: bcma, wl
System current wlan device:
wlan0	driver:brcmsmac	      status:COMPLETED	ip:192.168.1.6

[	SOUND INFORMATION	]
System sound device list:
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio
	Subsystem: Hewlett-Packard Company Device 1611
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
	Subsystem: Hewlett-Packard Company Pavilion dm1z-3000
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

[	GESTURE INFORMATION	]

[	GRAPHIC INFORMATION	]
System graphic device list:
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6310]
	Subsystem: Hewlett-Packard Company Device 1611
	Kernel driver in use: radeon
	Kernel modules: radeon
Best compatiable devices: i915
Basic compatiable devices: amdgpu nouveau

[	MISC INFORMATION	]

[	HID DEVICES	]
[    1.797296] hid: raw HID events driver (C) Jiri Kosina
[    1.797819] usbcore: registered new interface driver usbhid
[    1.797830] usbhid: USB HID core driver
[    2.233842] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:12.0-2/input0
[    2.241159] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:12.0-2/input1

[	PCI DEVICES	]
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex [1022:1510]
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6310] [1002:9802]
00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio [1002:1314]
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Port [1022:1512]
00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Port [1022:1513]
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40)
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40)
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43)
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1 [1022:1701]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2 [1022:1702]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3 [1022:1703]
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4 [1022:1704]
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6 [1022:1718]
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5 [1022:1716]
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7 [1022:1719]
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
02:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)

[	USB DEVICES	]
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 0a5c:21b4 Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0bda:0138 Realtek Semiconductor Corp. RTS5138 Card Reader Controller
Bus 002 Device 002: ID 174f:1134 Syntek HP Webcam-101
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[	DMESG WARN/ERROR	]
[    0.113203] Spectre V2 : Kernel not compiled with retpoline; no mitigation available!
[    0.384821] intel_rapl_common: driver does not support CPU family 20 model 1
[    1.435832] kvm: no hardware support
[    1.511934] ACPI: Invalid active0 threshold
[    1.797258] Driver 'memconsole' was unable to register with bus_type 'coreboot' because the bus was not initialized.
[    1.797264] Driver 'vpd' was unable to register with bus_type 'coreboot' because the bus was not initialized.
[    1.809613] Warning: unable to open an initial console. Fallback to ttynull.
[    2.598172] usb 2-1: config 1 interface 1 altsetting 4 endpoint 0x81 has invalid wMaxPacketSize 0
[    8.751051] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 425
[    8.751073] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 304
[    8.751082] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 307
[    8.751091] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 300
[    8.751099] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 305
[    8.751106] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 309
[    8.751120] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 308
[    8.751128] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 312
[    8.751135] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 302
[    8.751143] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 311
[    8.751150] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 1000
[   11.466205] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
[   11.466224] caller pci_map_rom+0x74/0x185 mapping multiple BARs
[   13.421182] EXT4-fs (sda1): mounting with "discard" option, but the device does not support discard
[   14.826022] frecon[283]: Failed to set atomic cap.
[   14.906398] frecon[283]: Unable to disable plane:43 Invalid argument
[   55.882360] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[   57.177066] udevd[1262]: Process '/bin/chown -R root:wilco_dtc /sys/firmware/dmi/tables' failed with exit code 1.
[   61.322634] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   61.322660] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  131.761578] init: cros-camera main process (2301) terminated with status 127
[  131.761654] init: cros-camera main process ended, respawning
[  222.517178] init: arc-kmsg-logger main process (2825) killed by TERM signal
[  288.531337] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[  288.531347] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  288.539367] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 159/256 dur 1778/1504
[  288.544080] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 137/256 dur 1602/1504
[  289.331976] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  938.235211] init: cros-camera main process (2891) terminated with status 104
[  938.235331] init: cros-camera main process ended, respawning
[  938.359992] init: cros_healthd main process ended, respawning
[ 1085.619558] init: ml-service (mojo_service) post-start process (6101) terminated with status 2
[ 1162.477993] init: arc-kmsg-logger main process (6178) killed by TERM signal

[	IP ADDRESSES	]
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
    link/ether 2c:76:8a:fc:59:60 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 44:1e:a1:0e:9d:f0 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.6/24 brd 192.168.1.255 scope global wlan0
       valid_lft forever preferred_lft forever
    inet6  scope link 
       valid_lft forever preferred_lft forever
4: arc_ns0@if2: <BROADCAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether  brd  link-netns connected_netns_0
    inet ###.###.###.### brd ###.###.###.### scope global arc_ns0
       valid_lft forever preferred_lft forever
    inet6  scope link 
       valid_lft forever preferred_lft forever
5: arc_ns1@if2: <BROADCAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether fa:9d:25:e6:58:cc brd ff:ff:ff:ff:ff:ff link-netns connected_netns_1
    inet ###.###.###.### brd ###.###.###.### scope global arc_ns1
       valid_lft forever preferred_lft forever
    inet6  scope link 
       valid_lft forever preferred_lft forever

Marcos_Aurelio · October 24, 2022, 8:34am

Looks like I found the answer.

AMD E-350 does not support SSE 4.2.

Is there any other way to make Android Subsystem work even without SSE 4.2 support?

Carrie_Gu · October 24, 2022, 10:24am

There is nothing you can do to make it work, sorry.

itinho · October 25, 2022, 6:36pm

isso quer dizer o que ??? o meu tbm fica assim

itinho · October 25, 2022, 6:36pm

é uma pena, porque eu gostei e queria utilizar o sistema

itinho · November 1, 2022, 6:01pm

But won’t there be an update to fix this problem on AMD?

Carrie_Gu · November 2, 2022, 8:54am

It’s not a bug. It’s a feature. This CPU is too old to run the Android subsystem since it does not support the SSE4.2 instruction set. We can’t make it support the SSE4.2 instruction set.

Marcos_Aurelio · January 4, 2023, 5:38pm

I find this quite frustrating, as it is exactly on these older devices that it should work.
Since Fydeos is a lighter system and ideal for reviving old equipment. They might find a way to use it without SSE4.2 support.

Marcos_Aurelio · January 4, 2023, 6:24pm

Infelizmente não pode ser usado com processadores mais antigos, apenas da terceira geração do Core da Intel ou equivalentes.
O que eu acho bem frustante, pois era em equipamentos mais antigos que deveria funcionar para dar uma sobrevida pro hardware mais antigo.

Carrie_Gu · January 5, 2023, 3:36am

This is computer science, not magic. We can’t push the boundaries of computer science.