Question Description
Have you searched the community for related issues?
- Yes no similar issue/solutions found
Please describe the problem you’ve encountered in detail:
- Description:
I cannot set a custom resolution for my raspberry pi 5 with my 24 inch touchscreen.
I have tried the following in config.txt:
hdmi_force_hotplug=1 # Pretend HDMI is always attached
hdmi_group=2 # Use DMT group (monitor timings)
hdmi_mode=82 # 1920x1080, 60Hz (DMT)
hdmi_drive=2
hdmi_ignore_edid=0xa5000080
Also tried using dtoverlay=vc4-fkms-v3d instead of dtoverlay=vc4-kms-v3d-pi5,cma-512 but then i do not get any screen on my monitor.
And when adding video=HDMI-A-1:1920x1080@60D to cmdline.txt, i do get a white screen on the monitor.
System & Device Information
- Hardware & System Configuration: Raspberry pi 5 $GB version
- FydeOS Version: FydeOS_for_SBC_Pi5_v19.0-io